Renogy 40A DC to DC 12V Dual Battery Charger For Flooded, Gel, AGM, and Lithium

Description

About Us
Video Tips
Downloads
Free Design Tools
FAQ
Contact Us
close
menu
About Us
Video Tips
Downloads
Free Design Tools
FAQ
Contact Us
Customer Feedback
Visit Our Store
Message Us
Renogy 40A DC to DC Battery Charger
KEY FEATURES
Multi-Chemistry Battery Types ( Flooded, Gel, AGM, and Lithium ).
Smart Protection Features ( Battery Isolation, Over-voltage safety, Overheat protection, and Reverse polarity protection).
3-phase Charging (Bulk, Boost, and Float).
Built tough for all conditions.
Able to charge an auxiliary battery to 100% state of charge.
Increases run time of loads, such as fridges and lights.
Overcomes voltage drop caused by long cable runs.
Prolongs Battery Life.
Description
Specification
Certification
Shipping & Returns
DESCRIPTION
OVERVIEW
This 40A DC to DC Charger is designed to charge secondary batteries while driving using the primary battery connected to the alternator. It is able to charge: Flooded, Gel, AGM, and Lithium batteries using multi-stage charging.
We offer complete residential and commercial solar kits for both on-grid and off-grid applications, including inverters, railing, and other system components. Please visit our
eBay store
for more information.
Video Tips
For more product introduction, syestem set up method and troubleshooting information, please check our Video Tips page.
SPECIFICATION
Renogy 40A DC to DC Battery Charger
Nominal Voltage:12V
Rated Charge Current:40A
Output:500W
Idle Power Consumption<0.4A
Input Voltage Range:8V-16V
Equalization Voltage:N/A
Float Voltage:13.2-13.8v
Boost Voltage: 14.1-14.7v
Operating Temperature:-20°C to +50°C
Dimensions:10.28 x 6.88 x 2.68 inches
Weight:4.14lbs
Certification
Renogy was founded on the strong belief that solar power should be available to everyone, anywhere on the planet. Thus we strive to offer clean energy for every application and will customize according to different needs. We use top quality solar cells and superior accessories to produce high performance solar modules that maximize the energy yield of the solar system per unit area, thereby reducing the system cost per watt for you.
Glass: 3.2mm tempered glass, excellent mechanical loading performance, resists 5400PA snow loads and 2400PA wind load.
& 4. EVA Film: main component is 30%-33% of EVA, which assures a high transmission, strong adhesion and long term performance.
Cell: excellent performance in low light environment and high conversion efficiency guaranteed.
Frame: strong corrosion resistant aluminum frames.
Backsheet: both sides of backsheet are coated with fluoro resin to prevent aging. This unique structure allows our backsheet to provide perfect adhesion with EVA and junction box.
QUALITY ASSURANCE• Industry-leading Testing Approved (Under UL1703, IEC 61215, IEC 61730 Standards)
Thermal Cycling Test
Thermal/Freezing and High Humidity Cycling Test
Electrical isolation Test
Mechanical, Wind and Twist Loading Test
Salt Mist Test
Light and Water-exposure Test
Moist Carbon Dioxide/Sculpture Dioxide
SHIPPING & RETURNS
Shipping POLICY
Renogy offers a variety of shipping methods as listed below as well as free ground shipping on many of our products. Any items that qualify for free shipping will be identified on the product listing page. Shipping times are based on
business days (Monday to Friday) excluding Holidays and weekends
. Depending on your order, your purchase may arrive in multiple packages. For orders with a value of 0 or more, a signature may be required.
Please note:
Not all items are eligible for Two Day or One Day shipping due to size, weight, hazardous materials, and delivery address.
Shipments cannot be rerouted once a package has been shipped.
Any orders in need of replacements due to shipping errors or damages in shipment will be sent out via ground shipping. Replacement orders cannot be expedited.
RETURN POLICY
At Renogy, we work hard to ensure a positive shopping experience with us. For purchases made directly from our online store, if for any reason you are not fully satisfied with your purchase, you may return your products
with original package within 30 days
as long as they are new, undamaged, and unmodified. We cannot guarantee that your item will be accepted for a refund or exchange if it does not meet these requirements. Return requests outside of 30 days require special authorization.
Renogy will pay the shipping costs of the returned item(s) for the following reasons: carrier damage, defective product, product inconsistent with advertisements, incorrect product received, or for any extra products you did not order. For all other reasons, customers are
responsible
for the return shipping fees.
Please note: Renogy will not accept returns with product modifications as it voids our warranty policy. Any modified products received will be returned to you at your expense.
Please be prepared with your invoice or the following information：
Order number
Proof of purchase
Video or photo of the faulty product (if applicable)
Mailing address
Contact telephone number
REPLACEMENT POLICY
If you have received a defective product or one damaged during shipping, you are eligible for a refund or replacement.
In the event of a replacement, Renogy will arrange for return shipment of the defective unit, and once the part has been received and inspected, we will ship out the replacement part.
If damage results due to improper handling during the setup or installation, whether done professionally or by the customer, then the product is
no longer eligible
for replacement or refund.
Other Items You Might Be Interested In
Renogy 200W 12V Starter Kit
SHOPNOW
Deep Cycle Battery W/ Box
SHOPNOW
40A Rover Li Charge Controller
SHOPNOW
TOP SELLER
Solar Panel
SHOPNOW
Solar Starter Kit
SHOPNOW
Solar Bundle Kit
SHOPNOW
Home
About Us
Shipping & Returns
Payment
FAQ
Contact Us
Copyright
RENOGY
| All rights reserved.